Ø 40 mm Core Drilling & M16 Tapping
RailMAB 965
LIGHTWEIGHT RAIL DRILL MACHINE
RDSO Approved Lightweight Rail Drill Machine. Just 21.5 Kg in weight and can be handled & operated by a single operator.
The lightweight rail drilling machine can be easily attached to the rails using a quick-release system. To ensure the necessary drilling stability, this exerts a pressure of 1.2 tons on the rail foot. This easy to use quick-change clamping system is very fast and can clamp & de-clamp within few seconds.
- 49.4 ccm cubic capacity
- 3.04 Nm torque
- Compact design
- Powerful quick-change clamping system
- Lightweight, just 21.5 Kg.
- Independent of electric power supply
- Powerful 1.5 kW (2HP) petrol engine
- Integrated petrol tank
Core Drilling
36 mm
Cutting Depth
30 mm
Powerful Motor
1500 Watt
Weight
21.5 Kg
 Motor output |
Watt
|
1500 |
 Voltage, V AC |
Volt
|
Petrol (Benzin) driven |
 Core drill cutting depth max. |
mm
|
30 |
 Core drill max. Ø HSS/TCT |
mm
|
36 |
 Twist drill |
≤ Ø mm
|
20 |
 Reaming |
------ |
|
 Countersinking |
------ |
|
 Thread cutting |
------ |
|
 Stroke |
mm
|
40 |
 Magnet dimensions |
mm
|
------ |
 Weight |
kg
|
21.5 |
 Spindle taper |
------ |
|
 Arbor |
Direct arbor 19 mm Weldon 3/4” |
|
 KEYLESS 19 mm Weldon 3/4“ |
------ |
|
 Speed gears |
1 |
|
 Gear 1 range |
min-1
|
110 – 280 |
 Permanent internal lubrication |
✔ |
|
 Safety clutch |
------ |
|
 Torque control |
------ |
|
 Full-wave control electronics |
------ |
|
 Magnetic Indicator |
------ |
|
 Overheating protection |
------ |
|
 Carbon brush wear control |
------ |
1 Ejector Pin ZAK 075
1 High-pressure tank, 5 litres
1 Rail adapter of your choice (no special version)
1 Offset Screwdriver SW 4 + 5+6
1 Carry Case
1 Operating Instructions
Product Video of Rail Drilling Machines
MAB 485 SB
Equipped With Swivel Base, Ø 40 mm Core Drilling & M16 Tapping
MAB 525
Ø 50 mm Core Drilling & M20 Tapping
MAB 525 SB
Equipped with Swivel Base, Ø 50 mm Core Drilling & M20 Tapping
MAB 455
Ø 40 X 55 mm Core Drilling
PipeMAB 200
Ø 35 mm Pipe Drilling Machine
PipeMAB 525
Ø 50 mm Pipe Drilling+Tapping Machine
MAB 455 SB
Swivel Base Equipped Ø 40 X 55 mm Core Drilling
MABasic 200
Ø 32 X 55 mm Core Drilling
MAB 825 KTS
Portable Drilling & Milling Machine
MABasic 400
Ø 35 X 55 mm Core Drilling
MABasic 850
Ø 75 X 110 mm Core Drilling
MAB 825
Ø 100 mm Core Drilling & M30 Tapping
MAB 845
Swivel Base Equipped Ø 100 mm Core Drilling & M30 Tapping
MAB 1300
Ø 130 mm Core Drilling & M42 Tapping
MAB 465
Ø 50 X 55 mm Drilling & M16 Tapping
AutoMAB 350
Ø 35 Fully Automatic Magnetic Drilling Machine
AutoMAB 450
Ø 45 Fully Automatic Magnetic Drilling Machine
MAB 825 V / MAB 845 V
Ø 60 mm Automatic / Ø 100 mm Manual Drilling
MAB 1300 V
Ø 60 mm Automatic / Ø 130 mm Manual Drilling
MAB 155PRO
Compact Horizontal Magnetic Drilling Machine
AirMAB 5000PRO
Pneumatic Magnetic Drilling Machine
with new PipeCLAMP
RailMAB 915
Electric Driven Rail Drilling Machine
RailMAB 965
Rail Drilling Machine (Petrol)
