BDS core drills are produced in five cutting depths od 30, 35, 55, 75 and 110 mm and with above 100 sizes different drilling machines diameters.
The range of BDS fully ground core drills.
In today's world, all it matters is Quality products. Quality does not just mean expensive pricing, luxurious packing, or clever marketing but, Quality means delivering a product with exceptional standards, highly skilled operators, best raw materials, expert end-control, and the most important is manufacturing the products by ourselves, without outsourcing.
With the same principle, BDS Maschinen manufactures the high-speed steel Annular Cutters in its very own state of the art factory located in Germany. The made in Germany BDS HSS Annular Cutters focusses only on Quality which results in premium performance, longer life, and more holes per cutter. BDS also manufactures a wide range of magnetic drilling machines and plate bevelling machines in the same modern factory in Germany.
High Speed Steel Annular Cutter Range
Core drills made from special steel with high cobalt content, for increased heat resistance and wear protection.
- High degree of heat resistance
- Better wear protection
- High cobalt content of 8%
- Suitable for higher loads in fine-grained steels and rustproof materials
- With 19mm or 32mm Weldon shank
- Can be resharpened
| KBK-VP | KBL-VP | |
|---|---|---|
| Cutting depth: | 30 mm | 55 mm |
| Drilling diameter: | 12 – 60 mm | 12 – 60 mm |
Fully ground core drills made from high-performance high-speed steel, with carbide coating, high degree of protection against wear, excellent discharge of chips.
- High-strength fully ground core drill
- Carbide coating in a range of 2.5 μ
- Longer service lives
- More uniform discharge of chips, particularly during prolonged drilling – a key point for safety during work
| KBK | KBL | KEL | KBK-Z | |
|---|---|---|---|---|
| Cutting depth: | 30 mm | 55 mm | 110 mm | 30 mm |
| Drilling diameter: | 12 – 60 mm | 12 – 60 mm | 20 – 50 mm | 1/2“ – 2 1/16“ |
Fully ground core drill made from high-performance high-speed steel
- Tools with three different cutting depths: 30mm, 55mm and 110mm
- Core drilling diameters of 12mm to 130mm
- Can be resharpened
Suitable for Quick-In arbor systems. Core drills made from special steel with high cobalt content, for increased heat resistance and wear protection.
- High degree of heat resistance
- Better wear protection
- High cobalt content of 8%
- Suitable for higher loads in fine-grained steels and rustproof materials
- With 19mm or 32mm Weldon shank
- Can be resharpened
Tungsten Carbide Tip Annular Cutter Range
Carbide-tipped core drills. For machining stainless steel and non-ferrous metals, we recommend our BDS 6000 high-performance cooling lubricant concentrate.
| KKK | HKL | HKX-L | HKE-L | |
|---|---|---|---|---|
| Cutting depth: | 30 mm | 55 mm | 75 mm | 110 mm |
| Drilling diameter: | 12 – 150 mm | 12 – 100 mm | 18 – 120 mm | 20 – 120 mm |
BDS core drills are produced on modern CNC-controlled grinding centres. This guarantees uniform cutting, quality and cutting performance of all BDS drilling tools across the entire range.
- Carbide-tipped core drills
- Cutting Depths of 30mm, 55mm, 75mm and 110mm
- Diameter of 12mm to 150mm
Carbide-tipped core drills with carbide coating.
| HKK-P | |
|---|---|
| Cutting depth: | 30 mm |
| Drilling diameter: | 12 – 60 mm |
Fully ground core drills made from high-performance high-speed steel, with carbide coating, high degree of protection against wear, excellent discharge of chips.
- High-strength fully ground core drill
- Carbide coating in a range of 2.5 μ
- Longer service lives
- More uniform discharge of chips, particularly during prolonged drilling – a key point for safety during work
Carbide-tipped core drills for rail core drilling machines.
| HKK-R | |
|---|---|
| Cutting depth: | 30 mm |
| Drilling diameter: | 17 – 36 mm |
Tungsten carbide tip core drills specially made for drilling rail tracks as well as hard and corrosive material. These core drils have a special grade of carbide which is suitable for drilling harder materials. The carbide rail core drills are available in varius diameters.
Carbide-tipped core drillsCutting depth 35mm
Ideal for track drilling
32mm Weldon shank
Core drills made from carbide-tipped. Suitable in Quick-In arbor systems.
| HKK-F | |
|---|---|
| Cutting depth: | 35 mm |
| Drilling diameter: | 12 – 60 mm |
Suitable for Quick-In arbor systems. BDS core drills are produced on modern CNC-controlled grinding centres. This guarantees uniform cutting, quality and cutting performance of all BDS drilling tools across the entire range.
- Carbide-tipped core drills
- Cutting depth 35mm
Huge vertical range of products
Arbors
BDS core drilling tools are different arbors. They fir the KEYLESS quick-change driling system and the MT 2, MT 3 and MT 4 industrial arbors also available in the range of accessories with automatic manual internal lubrication.
