Chamfer Width: 30 mm (1-3/16″)
Fully Automatic Beveling Machine:15-60° Continuously
EKF 530
30° X 12 mm Beveling
The new BDS Series of Portable Beveling Machines are tailor-made to meet the requirements of every operator. The new EKF 500 & 600 series from BDS is designed for maximum performance and optimal comfort. With the new milling head technology, the EKF Beveling Machines can also operate at low speeds without jerking or jumping. The result is optimally milled edges, even when rounding. The EKF 530 portable beveling machine is ideal for 30-degree chamfer with 12 mm (0.472'') width. The EKF 530 is equipped with a new generation milling cutter special carbide inserts. Made in Germany EKF 530 comes with an 1800 Watts (14.50 Amp) powerful motor delivering 1850 - 3350 RPM. The EKF 530 has variable speed control to fine tune the RPM you require. Weighing just 9.3 Kg. (20.5 lbs.) the EKF 530 is available in 220-240 V & 110-125 V (50-60 Hz).
 Motor Output |
1800 Watts |
 Voltage |
220-240 / 110-125 Volt (50-60 Hz) |
 Speed |
Seamless Electronic speed regulation (1850 - 3350 min-1) with full wave control electronics |
 Feed |
Manual |
 Chamfer Width |
0-12 mm |
 Angle Adjustment |
30° |
 Milling Cutter |
ZFR 530 |
 Carbide Reversible Disc (Insert) |
SHM 900 / SHM 900 E |
 Weight |
9.3 Kg |
1 Arbour milling cutter (ZFR 530) with 6 carbide insert (SHM 900)
1 Hook wrench 45/50
1 Torx screwdriver TX 15
1 Spanner SW 22
1 Carry case
1 Operating manual
Product Video of Beveling Machines
Accessories
Arbour Milling Cutter
ZFR 530
Carbide Reversible Disc (Insert)
SHM 900 & SHM 900 E
AutoCUT 500
Chamfer Width: 30 mm (1-3/16″)
Fully Automatic Beveling Machine:15-60° Continuously
SKF 25
Chamfer Width: 15 mm (3/4″)
Chamfer Angle: 15-60° Continuously
EKF 530
Chamfer Width: 12 mm (0.472”) Chamfer Angle: 30°
EKF 300.3
Chamfer Width: 5 mm (1/4″)
Chamfer Angle: 30°
EKF 545
Chamfer Width: 12 mm (0.472”) Chamfer Angle: 45°
EKF 450.3
Chamfer Width: 6 mm(1/4″)
Chamfer Angle: 45°
EKF 630
Chamfer Width: 15 mm (0.590”) Chamfer Angle: 30°
EKF 452.3
Chamfer Width: Radius 2.5 mm(0.098″)
EKF 645
Chamfer Width: 15 mm (0.590”) Chamfer Angle: 45°
