HSS Vario-PLUS Series Annular Cutters

Made in Germany

Fully ground core drills made from high-performance high-speed steel with carbide coating. High economic efficiency due to longer service life, greater safety during work thanks to excellent discharge of chips, particularly for long core drills. BDS recommends the BDS 5000 high-performance cutting oil.

  • High-strength fully ground core drill
  • Carbide coating in a range of 2.5 μ
  • Longer service lives
  • More uniform discharge of chips, particularly during prolonged drilling – a key point for safety during work
High-strength full-ground core drills, which are further processed under the influence of plasma with a hard material layer in the range of 2.5 μ. As a result, these tools achieve a significantly longer service life and more even chip removal, especially with long drills. An important point for occupational safety

HSS Vario-PLUS Series Annular Cutters

HSS CORE DRILL WITH A CARBIDE COATING

Technical specifications

  Short Long
Quality HSS M2 Carbide Coated HSS M2 Carbide Coated
Article no. KBK-VP KBL-VP
Cutting depth in mm 30 55
Diameter in mm 12-60 12-60
Weldon Shank 19 mm (3/4") 19 mm (3/4")
Ejector Pin ZAK 075 ZAK 100
Lubricant BDS 5000 BDS 5000
Carbide Coating

Annular Cutters Box & Cassettes

HSS-VarioPLUS short core drill Box
5x KBK-VP core drill with 30 mm cutting depth

KBK Box 1-V

2 x KBK-VP 014

2 x KBK-VP 018

1 x KBK-VP 022

HSS-VarioPLUS long core drill Box
5x KBL-VP core drill with 55 mm cutting depth

KBL Box VarioPLUS

2 x KBL-VP 014

2 x KBL-VP 018

1 x KBL-VP 022

HSS-VarioPLUS short core drill Cassette
6x KBK-VP core drill with 30 mm cutting depth

KBK-VP 001

2X KBK-VP 014

2X KBK-VP 018

2X KBK-VP 022

1x ZAK 075

HSS-VarioPLUS short core drill Cassette
6x KBK-VP core drill in 30 mm cutting depth

KBK-VP 002

1X KBK-VP 013

1X KBK-VP 014

1X KBK-VP 017

1X KBK-VP 018

1X KBK-VP 021

1X KBK-VP 022

1x ZAK 075

Product Video of Annular Core Cutters

Recommended Cutting Speed & Lubricant

  • Material
  • Fine-grain Steel <700 N/m2
  • Fine-grain Steel <1000 N/m2
  • Cutting Speed
  • 10-15 m/min
  • 10-15 m/min
  • Lubricant
  • Cutting Oil BDS 5000
  • Cutting Oil BDS 5000