HSS Core Drills With 8% Cobalt
HSS-VarioPLUS Short Core Drill
Core drill with hard material coating
Fully ground core drills made from high-performance high-speed steel with carbide coating. High economic efficiency due to longer service life, greater safety during work thanks to excellent discharge of chips, particularly for long core drills. BDS recommends the BDS 5000 high-performance cutting oil.
- High-strength fully ground core drill
- Carbide coating in a range of 2.5 μ
- Longer service lives
- More uniform discharge of chips, particularly during prolonged drilling – a key point for safety during work
HSS-VarioPLUS Short Core Drill
HSS CORE DRILL WITH A CARBIDE COATING
Technical specifications
| Short | Long | |
|---|---|---|
| Quality | HSS Hartstoffschicht | HSS mit Hartstoffschicht |
| Article no. | KBK - VP | KBL - VP |
| Cutting depth in mm | 30 | 55 |
| Diameter in mm | 12-60 | 12-60 |
| Weldon Shank | 19 mm (3/4") | 19 mm (3/4") |
| Ejector Pin | ZAK 075 | ZAK 100 |
| Lubricant | BDS 5000 | BDS 5000 |
| Carbide Coating | ja | ja |
Annular Cutters Box & Cassettes
Product Video of Annular Core Cutters
Recommended Cutting Speed & Lubricant
HSS Vario-PLUS Series Annular Cutters
HSS Core Drills With Coating
HSS Standard Series Annular Cutters
Fully Ground Core Drills From M2 HSS
Series Quick-In HSS-Co 8-F Annular Cutters
HSS Core Drills For Quick-In Shank
CarbidePLUS Series Annular Cutters
TCT Core Drills With Coating
CarbideRAIL Series Annular Cutters
Special Core Drills For Rail Drilling
Carbide-F Quick-In Series Annular Cutters
TCT Core Drills For Quick-In Shank
HSS-VarioPLUS Short Core Drill
Core Drills With Carbide Coating
